Porsche Key Replacement Cost
It can be frustrating to lose your Porsche key. Luckily, there are a couple of options you can consider.
You can purchase a new Porsche key from your local Porsche dealer. It can be expensive. You'll also have to wait for the key to arrive.
Change the ignition switch/lockcylinder.
The ignition switch is an important element of your Porsche's run/start system. If the switch is damaged it can cause your car difficult to start or even impossible to drive. Switching your Porsche key's lock or cylinder is an easy process which can help you save a lot of money and hassle.
The ignition switch is situated on the steering column. You can remove it with a simple screwdriver when it's in good working order. You'll need to have it replaced by a professional mechanic if it is damaged.
Before you take this decision you must consider your budget and whether you can complete the repair yourself. For instance whether you have access to a tool that can replace the switch or you can purchase the replacement yourself from an auto parts shop.
In most cases, the only thing to fix a damaged or worn ignition switch is to replace it. This is particularly true when the vehicle's immobilizer mechanism requires that the old lock cylinder be removed to allow it to function.
You will need to disconnect the battery's negative cable to access the ignition switch. It is also necessary to remove any covers or trims that could hinder your access to the switch.
After you've removed any trim panels or covers, remove any fasteners that keep them in the place. Then, you can remove the locking tab from lock cylinder with a pick or an awl.
After you've changed the lock cylinder, you should be able to access the capability to use your key to unlock and turn on the ignition. You should hear a click from the switch when you've done it right.
Next, test it to make sure that it works. If it works then you're ready to move on to the actual installation.
Changing the ignition switch/lock cylinder is a simple process, but it's essential to follow correct procedure. If you don't follow the correct steps, it could lead to serious problems with the security systems of your Porsche. This is why it's always best to hire a professional to do the task.
Replacing the key fob
The key fob in a Porsche allows you to lock and unlock your car with the touch of a one button. But, like any electronic device, the battery in the key fob will eventually deplete and require replacement.
Replacing keys for a Porsche key is an intricate process and should only be left to experts. Locksmiths specialized in Porsche automobiles are familiar with the security systems of these vehicles and will be able to give you an accurate estimate of the cost for replacing keys.
Based on the model and year of your Porsche, the cost of a new key can vary. For instance a model made in 2005 may be more expensive than the 2009 model.
In general, it's a good idea to keep an extra key available since the cost of a key replacement could be quite expensive. This is especially true for Porsche owners. These vehicles are extremely luxurious and the key fobs provided with them are made to meet the most stringent security standards.
If you lose your key first step is to find an locksmith who can cut a new key for you. To request a replacement for your key you should also contact your Porsche dealer. This is an option for those who have the funds to purchase a replacement key at an authorized dealer.
Once you find a locksmith with experience in cutting and programming keys for Porsche automobiles, you must set up an appointment to get your keys made. This can take up to 20 minutes, however the process will depend on the type of car key that is required and the complexity of the lock.
If the key needs to be replaced is equipped with a chip, then it will need to be programmed on site to work with your car. This is because the key has transponder chips that are specific to your vehicle.
There are a variety of reasons why your key may need to be reprogrammed, for example:
Programming is the primary
It's important to have your key reprogrammed in the event that it stops working or you require a new key. This will enable your car to restart, and save you the expense of replacing the ignition switch/lockcylinder.
This can be done by an auto locksmith. The cost will be based on the year and model of your vehicle, but it is cheaper than replacing the ignition switch or lock cylinder fitted.
Two security features are included in the Porsche key it has a remote transmitter which uses rolling codes and an immobilizer that locks it if the code isn't correct. The code needs to be reset prior to the key working properly.
There are many ways to modify the programming of your Porsche key. The majority of manufacturers make it simple to do this yourself, however certain models require specific tools and procedures. To find out more about the process you need to contact your local dealer.
To get your key programmed, have to bring your original key and your VIN number to the dealer. This is a straightforward process that usually takes few minutes.
The majority of modern Porsche models are equipped with transponders or chips. These chips are placed in your key and communicate with an ignition receiver. They can be non-transponder (no requirement for programming) or transponder, which needs to be programmed.
If you're not sure if your Porsche key needs to be programmed, call United Locksmith for an estimate. Our team will determine whether or not it is and will provide you with an accurate estimate of cost.
Another option is to get the key cut at your dealership or an automotive locksmith. These locksmiths are more experienced and have the knowledge to create a replacement key. They are able to make duplicate keys for less than what it costs to have a new key made at the dealership.
You can save money on your Porsche key replacement costs by locating spare keys in your home or possession. A locksmith who is knowledgeable in Porsche automobiles can also help you to cut your key.
Replacing the battery
A key is included with every new Porsche. It allows you to lock and unlock the doors and also lets you start the engine. However, the battery in your Porsche's key may not be working as it should, and you might be looking for a way to replace it.
The majority of modern Porsche keys rely on an internal battery for their operation. In the process, they tend to lose power over time. This can cause problems like a red light on the dashboard or difficulty starting your car.
If your battery is becoming weak or your key has stopped completely, you must seek out a professional to replace it. The cost of replacing your car will vary according to the make and model. The process is fast and simple.
Before you attempt any replacement of the battery, you should read your owner's instruction manual. Before replacing the battery be sure to verify the condition of the polarity.
First take off the battery from your key. This can be accomplished by flipping the key and then removing it from the back.
Next, you will need to pull out the emergency key that is located on the back of the battery. Turn porsche keyfob so that it is on its backside. Then, press the release button at the bottom of the key.
When you remove the emergency key after which you'll be able to see the black plastic circle that protects the battery. This is the part that has to be replaced. You can gently pull it.
Then, take the battery from its plastic casing using the screwdriver. This will expose the CR2032 within.
Then, insert the new battery and make sure it is facing the correct way. Once you've replaced the battery, you can put the emergency key into the fob.
If you're having issues with the Porsche's key, bring it into the dealership for a professional to help. Our team can help you determine the problem and recommend that the key be replaced, reprogrammed, or completely replaced.